ISL55185 (TRITON)
8 Channel 32V @24mA PPMU
ISL55185 is a highly integrated System-on-a-Chip pin electronics solution incorporating 8 independent channels of:
- PMU
- Active Load
- External Force / External Sense
The interface, the control, and the I/O are digital; all analog circuitry is inside the chip. Eight complete and independent channels are integrated into each chip.
For most tester applications, no additional analog hardware needs to be developed or used on a per pin basis.
Features
Per Channel Active Load
- 24mA maximum current
- MI capability
- Independent source and sink current levels
- Extremely low HiZ leakage over a 32V range
- 32V Input compliance/28V Output Forcing Range
- Extremely Low Input Leakage over a 32V Range
Per Pin PMU
- FV/MI/MV
- 5 Current Ranges (24mA, 4mA, 400μA, 40μA, 4μA)
- FV Current Clamps
- 32V Input Compliance/28V Output Forcing Range
- Extremely Low Input Leakage over a 32V Range
Monitor
- Differential per Channel Monitor with HiZ
- Differential Central Monitor with HiZ
External Force/Sense per Channel
- 11 Levels/Pin
- Gain and Offset /Level
- DUT Ground Sensing/Pin
3-Bit Serial C’PU Port
On-Chip DAC to Generate DC Levels
- 4 DC Levels per Channel (16 bits/level)
- On-Chip Offset and Gain Correction per Level
Package/Power Dissipation
- Lead Free
- 128 Lead, 14mm x 20mm TQFP w/Heat Slug
- Pdq ≤ 250mW/channel; Pdq ≤ 2W/chip
- On Chip
- On Chip
Applications
- Automated Test Equipment
- Instrumentation
- ASIC Verifiers
COMPARE PRODUCTS
INTEGRATED PIN ELECTRONICS PRODUCT COMPARISON CHART
INTEGRATED DIGITAL PIN ELECTRONICS PRODUCT COMPARISON CHART
VIEW PRODUCT DATASHEET
INTEGRATED PMU/DPS AND V/I PRODUCT COMPARISON CHART
INTEGRATED PMU/DPS AND V/I PRODUCT COMPARISON CHART
VIEW PRODUCT DATASHEET
Guide + DATASHEET + Download
Here you can access our product manuals, datasheets, and get-started guides.
DOWNLOAD THE ISL55185 (TRITON) DATASHEET
Support inquiries
SUPPORT REQUEST
SIGN INTO SUPPORT
In need of assistance? We’ve got you covered. Select from the options below or reach out to us directly at support@elevatesemi.com. We’re here to help!
