ELE18RA1A (RAINIER)
8 Channel 1.6Gbps Pin Electronics/DAC/PPMU/Deskew
The Rainier is a highly integrated System-on-a-Chip (SoC) pin electronics solution that incorporates every analog function, along with digital support circuitry required to create 8 independent pin channels for Automated Test Equipment. Each channel is configured via a 100MHz SPI interface, and all real time data is programmed and read back through high speed FLEX I/O pins that can be configured to interface directly to other devices using multiple single-ended and differential logic families.
Rainier is ElevATE’s flagship PE, PMU, DAC + Deskew product that combines the market’s lowest power and 1.6Gbps performance. Rainier’s high-density 8 independent channels feature 500mW per channel with driver and comparator running at max speed.
Features
Pin Electronics Driver
- 3-level Driver with Hi-Z Capability (DVH, DVL, VTT)
- 100mV to 6V Swing Across -1.5V to +4.5V Range
- Extremely Low Hi-Z Leakage over Entire I/O Range
- Short Circuit Protection
- 30ps Deterministic Jitter at 1.6Gbps
- 40ps Total Jitter range
- Trise/Tfall 160ps/150ps at 1V
- Trise/Tfall 190ps/180ps at 2V
- 50Ω Programmable Termination
- Short Circuit Protection
Per Pin Comparator
- Up to 6V Comparator Input Range
- Comparator Input Equivalent Bandwidth = 2GHz
- Selectable (On/Off) Hysteresis
- Window and Differential Comparator
Per Pin PMU (PPMU)
- FV, FI, MV, MI
- 4 Quadrant Operation
- -1.5V to +4.5V FV Range
- -2 to +5V MV Range
- 5 Current Ranges (±2μA, ±20μA, ±200μA, ±2mA, ±50mA)
- Programmable Voltage and Current Clamps
- Resistive Load Function (12 Selectable Resistor Values)
Per Pin Active Load
- ±24mA Maximum Current
- Independently Programmable Current Source, Current Sink, and Commutating Voltage levels
Per Pin Timing Deskew
Propagation Delay Adjustment
- 1.9ns Delay Adjustment Range
- 3ps Delay Adjustment Resolution
Rising/Falling Edge Adjust Range -1.5ns to 1.5ns
Duty Cycle Adjust Range -200ps to +200ps
9 Dedicated Level DACs per Channel
Per-Level Offset Correction
16-bit Resolution
DUT Ground Sensing and Correction (1 Per Chip)
100MHz SPI Interface
Single-Ended and Differential High-Speed IO Capability
Analog Measure Bus
Selectable Over-Temperature Protection
Monitor Per Channel
Pmax < 500mW per Channel with Driver and Comparator running at Max Speed
13mm x 13mm, 225 Ball FcCSP (0.8mm Pitch
COMPARE PRODUCTS
INTEGRATED PIN ELECTRONICS PRODUCT COMPARISON CHART
INTEGRATED DIGITAL PIN ELECTRONICS PRODUCT COMPARISON CHART
VIEW PRODUCT DATASHEET
INTEGRATED PMU/DPS AND V/I PRODUCT COMPARISON CHART
INTEGRATED PMU/DPS AND V/I PRODUCT COMPARISON CHART
VIEW PRODUCT DATASHEET
Guide + DATASHEET + Download
Here you can access our product manuals, datasheets, and get-started guides.
Support inquiries
SUPPORT REQUEST
SIGN INTO SUPPORT
In need of assistance? We’ve got you covered. Select from the options below or reach out to us directly at support@elevatesemi.com. We’re here to help!
